Filters

CMT | Boring Bits

570 products

Showing 1 - 48 of 570 products

Showing 1 - 48 of 570 products
View
CMT 310.080.12 DOWEL DRILL 8x27x57.5 LH CMT 310.080.12 Dowel Drill 8mm (5/16-Inch) Diameter 10x27mm Shank Left-Hand Rotation
CMT 310.080.12 Dowel Drill 8mm (5/16-Inch) Diameter 10x27mm Shank Left-Hand Rotation
$13.73
CMT 317.350.11 Hinge Boring Bit 35 x 57.5 RHCMT 317.350.11 Hinge Boring Bit 35 x 57.5 RH
CMT 317.350.11 Hinge Boring Bit 35 x 57.5 RH
$30.82
CMT 310.020.22 DOWEL DRILL 2x12x57.5 LH CMT 310.020.22 Solid Carbide Dowel Drill with 2mm 5/64-Inch 10 by 35mm Shank and Left-Hand Rotation
CMT 310.020.22 Solid Carbide Dowel Drill with 2mm 5/64-Inch 10 by 35mm Shank and Left-Hand Rotation
$17.72
CMT 311.050.12 DOWEL DRILL 5x35x70 LH CMT 311.050.12 Two Flute Dowel Drill, 5mm (13/64-Inch) Diameter, 10x30mm Shank, Left-Hand Rotation
CMT 311.050.12 Two Flute Dowel Drill, 5mm (13/64-Inch) Diameter, 10x30mm Shank, Left-Hand Rotation
$11.27
CMT 311.050.11 DOWEL DRILL 5x35x70 RH CMT 311.050.11 Two Flute Dowel Drill 5mm (13/64-Inch) Diameter 10x30mm Shank Right-Hand Rotation
CMT 311.050.11 Two Flute Dowel Drill 5mm (13/64-Inch) Diameter 10x30mm Shank Right-Hand Rotation
$11.27
CMT 310.080.42 DOWEL DRILL 8x27x57.5 LH CMT 310.080.42 Dowel Drill, 8mm (5/16-Inch), 10x27mm Shank, Left-Hand Rotation
CMT 310.080.42 Dowel Drill, 8mm (5/16-Inch), 10x27mm Shank, Left-Hand Rotation
$16.71
PRE-ORDER
CMT 521.002.21 Solid Carbide Countersink 90 degree Diameter 3/4 inch RHCMT 521.002.21 Solid Carbide Countersink 90 degree Diameter 3/4 inch RH
CMT 521.002.21 Solid Carbide Countersink 90 degree Diameter 3/4 inch RH
$27.31
CMT 363.020.12 TWIST DRILL 2x25x49 LH CMT 363.020.12 V-Point Solid Carbide Twist Drill 120 degree sharpening 2mm (5/64-Inch) Left-Hand Rotation
CMT 363.020.12 V-Point Solid Carbide Twist Drill 120 degree sharpening 2mm (5/64-Inch) Left-Hand Rotation
$13.33
LIMITED SUPPLY
CMT 393.350.11 HINGE BORING BIT TCT S=10X20 D=35x38.5MM RH
CMT 393.350.11 Hinge Boring Bit with 35mm 1-3/8-Inch Diameter with 10 by 20mm Shank and Right-Hand Rotation
$37.93
CMT 364.020.00 Adaptor for twist drills, 2mm (5/64-inch) Diameter, 10x20mm ShankCMT 364.020.00 Adaptor for twist drills 2mm (5/64-inch) Diameter 10x20mm Shank
CMT 364.020.00 Adaptor for twist drills 2mm (5/64-inch) Diameter 10x20mm Shank
$12.89
CMT 360.101.00 Drill Adaptor for Vitap, 10mm (25/64-Inch) Shank, 18mm (23/32-Inch) Diameter, Right and Left Hand RotationCMT 360.101.00 Drill Adaptor for Vitap 10mm (25/64-Inch) Shank 18mm (23/32-Inch) Diameter Right and Left Hand Rotation
CMT 360.101.00 Drill Adaptor for Vitap 10mm (25/64-Inch) Shank 18mm (23/32-Inch) Diameter Right and Left Hand Rotation
$24.33
CMT 311.050.41 Two Flute Dowel Drill, 5mm (13/64-Inch) Diameter, 10x27mm Shank, Right-Hand RotationCMT 311.050.41 Two Flute Dowel Drill 5mm (13/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
CMT 311.050.41 Two Flute Dowel Drill 5mm (13/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
$14.62
CMT 311.040.21 DOWEL DRILL 4x27x70 RH CMT 311.040.21 Solid Carbide Dowel Drill 4mm (5/32-Inch) Diameter 10X30mm Shank Right-Hand Rotation
CMT 311.040.21 Solid Carbide Dowel Drill 4mm (5/32-Inch) Diameter 10X30mm Shank Right-Hand Rotation
$20.72
PRE-ORDER
CMT 310.100.12 DOWEL DRILL 10x27x57.5 LH CMT 310.100.12 Dowel Drill 10mm (25/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
CMT 310.100.12 Dowel Drill 10mm (25/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
$15.46
CMT 310.082.12 DOWEL DRILL 8.2x27x57.5 LH CMT 310.082.12 Dowel Drill 8.2mm (21/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
CMT 310.082.12 Dowel Drill 8.2mm (21/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
$15.15
CMT 310.082.11 DOWEL DRILL 8.2x27x57.5 RH CMT 310.082.11 Dowel Drill 8.2mm (21/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
CMT 310.082.11 Dowel Drill 8.2mm (21/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
$15.15
CMT 369.200.11 20 x 70 Right-Hand Hinge Boring Bit
CMT 369.200.11 20 x 70 Right-Hand Hinge Boring Bit
$33.95
PRE-ORDER
CMT 302.000.02 ADAPTOR D10 S=M10 LH
CMT 302.000.02 Boring Bit Adaptor, 10mm Bit Diameter, M10 Type of Shank, Left-Hand Rotation
$10.77
CMT 309.040.11 Dowel Drill, 4mm (5/32-Inch) Diameter, 10x20mm Shank, Right-Hand RotationCMT 309.040.11 Dowel Drill, 4mm (5/32-Inch) Diameter, 10x20mm Shank, Right-Hand Rotation
CMT 309.040.11 Dowel Drill, 4mm (5/32-Inch) Diameter, 10x20mm Shank, Right-Hand Rotation
$15.42
PRE-ORDER
CMT 306.050.11 DOWEL DRILL 5x30x55.5 RH CMT 306.050.11 Dowel Drill, 5mm (13/64-Inch) Diameter, 8x20mm Shank, Right-Hand Rotation
CMT 306.050.11 Dowel Drill, 5mm (13/64-Inch) Diameter, 8x20mm Shank, Right-Hand Rotation
$14.05
CMT 369.200.12 Hinge Boring Bit 20 x 70 LH
CMT 369.200.12 Hinge Boring Bit 20 x 70 LH
$29.83
CMT 369.350.12 Hinge Boring Bit 35 x 70 LH
CMT 369.350.12 Hinge Boring Bit 35 x 70 LH
$33.82
LIMITED SUPPLY
CMT 317.350.12 Hinge Boring Bit 35 x 57.5 LH
CMT 317.350.12 Hinge Boring Bit 35 x 57.5 LH
$30.82
LIMITED SUPPLY
CMT 317.250.12 Hinge Boring Bit 25 x 57.5 LH
CMT 317.250.12 Hinge Boring Bit 25 x 57.5 LH
$33.41
LIMITED SUPPLY
CMT 317.550.11 Hinge Boring Bit 55 x 57.5 RH
CMT 317.550.11 Hinge Boring Bit 55 x 57.5 RH
$62.17
CMT 376.080.12 D/D W/C.SINK 8x12x57 S10x25 LH CMT 376.080.12 Dowel Drill with Countersink 5/16-Inch Diameter 10mm Shank Left-Hand Rotation
CMT 376.080.12 Dowel Drill with Countersink 5/16-Inch Diameter 10mm Shank Left-Hand Rotation
$27.04
CMT 376.080.11 Dowel Drill with Countersink, 5/16-Inch Diameter, 10mm Shank, Right-Hand RotationCMT 376.080.11 Dowel Drill with Countersink 5/16-Inch Diameter 10mm Shank Right-Hand Rotation
CMT 376.080.11 Dowel Drill with Countersink 5/16-Inch Diameter 10mm Shank Right-Hand Rotation
$27.04
LIMITED SUPPLY
CMT 375.060.11 D/D THROUGH HOLE 6x40x70 RH CMT 375.060.11 4 Flute Dowel Drill for Through Holes 6mm (15/64-Inch) Diameter 10x20mm Shank Right-Hand Rotation
CMT 375.060.11 4 Flute Dowel Drill for Through Holes 6mm (15/64-Inch) Diameter 10x20mm Shank Right-Hand Rotation
$19.72
CMT 363.025.11 TWIST DRILL 2.5x27x57 RH CMT 363.025.11 V-Point Solid Carbide Twist Drill 120 degree sharpening 2.5mm (7/64-Inch) Right-Hand Rotation
CMT 363.025.11 V-Point Solid Carbide Twist Drill 120 degree sharpening 2.5mm (7/64-Inch) Right-Hand Rotation
$14.68
CMT 310.100.42 DOWEL DRILL 10x27x57.5 RH CMT 310.100.42 Dowel Drill 10mm (25/64-Inch) 10x27mm Shank Left-Hand Rotation
CMT 310.100.42 Dowel Drill 10mm (25/64-Inch) 10x27mm Shank Left-Hand Rotation
$18.87
CMT 310.100.11 DOWEL DRILL 10x27x57.5 RH CMT 310.100.11 Dowel Drill 10mm (25/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
CMT 310.100.11 Dowel Drill 10mm (25/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
$15.46
LIMITED SUPPLY
CMT 310.095.12 DOWEL DRILL 9.52x27x57.5 LH CMT 310.095.12 Dowel Drill 3/8-Inch Diameter 10x27mm Shank Left-Hand Rotation
CMT 310.095.12 Dowel Drill 3/8-Inch Diameter 10x27mm Shank Left-Hand Rotation
$18.23
LIMITED SUPPLY
CMT 310.060.12 DOWEL DRILL 6x27x57.5 LH CMT 310.060.12 Dowel Drill 6mm (15/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
CMT 310.060.12 Dowel Drill 6mm (15/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
$12.89
CMT 310.050.12 DOWEL DRILL 5x27x57.5 LH CMT 310.050.12 Dowel Drill 5mm (13/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
CMT 310.050.12 Dowel Drill 5mm (13/64-Inch) Diameter 10x27mm Shank Left-Hand Rotation
$10.60
CMT 310.050.11 DOWEL DRILL 5x27x57.5 RH CMT 310.050.11 Dowel Drill 5mm (13/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
CMT 310.050.11 Dowel Drill 5mm (13/64-Inch) Diameter 10x27mm Shank Right-Hand Rotation
$10.60
CMT 308.050.12 DOWEL DRILL 5x30x57.5 LH CMT 308.050.12 Dowel Drill 5mm (13/64-Inch) Diameter 10x20mm Shank Left-Hand Rotation
CMT 308.050.12 Dowel Drill 5mm (13/64-Inch) Diameter 10x20mm Shank Left-Hand Rotation
$10.60
CMT 308.050.11 DOWEL DRILL 5x30x57.5 RH CMT 308.050.11 Dowel Drill 5mm (13/64-Inch) Diameter 10x20mm Shank Right-Hand Rotation
CMT 308.050.11 Dowel Drill 5mm (13/64-Inch) Diameter 10x20mm Shank Right-Hand Rotation
$10.60
LIMITED SUPPLY
CMT 307.060.12 DOWEL DRILL 6x40x67 LH CMT 307.060.12 Dowel Drill 8mm Diameter 6x40x67mm Shank Left-Hand Rotation
CMT 307.060.12 Dowel Drill 8mm Diameter 6x40x67mm Shank Left-Hand Rotation
$15.46
LIMITED SUPPLY
CMT 306.080.11 DOWEL DRILL 8x30x55.5 RH CMT 306.080.11 Dowel Drill 8mm (5/16-Inch) Diameter 8x20mm Shank Right-Hand Rotation
CMT 306.080.11 Dowel Drill 8mm (5/16-Inch) Diameter 8x20mm Shank Right-Hand Rotation
$15.52
LIMITED SUPPLY
CMT 369.450.11 Hinge Boring Bit, 45mm (1-25/32-Inch) Diameter, 10X26 Shank, Right-Hand RotationCMT 369.450.11 Hinge Boring Bit, 45mm (1-25/32-Inch) Diameter, 10X26 Shank, Right-Hand Rotation
CMT 369.450.11 Hinge Boring Bit, 45mm (1-25/32-Inch) Diameter, 10X26 Shank, Right-Hand Rotation
$61.53
LIMITED SUPPLY
CMT 369.400.11 Hinge Boring Bit, 40mm (1-37/64-Inch) Diameter, 10X26 Shank, Right-Hand RotationCMT 369.400.11 Hinge Boring Bit, 40mm (1-37/64-Inch) Diameter, 10X26 Shank, Right-Hand Rotation
CMT 369.400.11 Hinge Boring Bit, 40mm (1-37/64-Inch) Diameter, 10X26 Shank, Right-Hand Rotation
$45.06
LIMITED SUPPLY
CMT 317.450.11 Hinge Boring Bit, 45mm (1-25/32-Inch) Diameter, 10X26 Shank, Right-Hand RotationCMT 317.450.11 Hinge Boring Bit, 45mm (1-25/32-Inch) Diameter, 10X26 Shank, Right-Hand Rotation
CMT 317.450.11 Hinge Boring Bit, 45mm (1-25/32-Inch) Diameter, 10X26 Shank, Right-Hand Rotation
$60.41
LIMITED SUPPLY
CMT 378.052.12 Dowel Drills for through holes with countersink 5 x 35 x 70 S=10 LHCMT 378.052.12 Dowel Drills for through holes with countersink 5 x 35 x 70 S=10 LH
CMT 378.052.12 Dowel Drills for through holes with countersink 5 x 35 x 70 S=10 LH
$29.99
PRE-ORDER
CMT 378.052.11 Dowel Drills for through holes with countersink 5 x 35 x 70 S=10 RHCMT 378.052.11 Dowel Drills for through holes with countersink 5 x 35 x 70 S=10 RH
CMT 378.052.11 Dowel Drills for through holes with countersink 5 x 35 x 70 S=10 RH
$29.99
PRE-ORDER
CMT 369.150.12 Hinge Boring Bit, 15mm (19/32-Inch) Diameter, 10X26 Shank, Left-Hand RotationCMT 369.150.12 Hinge Boring Bit, 15mm (19/32-Inch) Diameter, 10X26 Shank, Left-Hand Rotation
CMT 369.150.12 Hinge Boring Bit, 15mm (19/32-Inch) Diameter, 10X26 Shank, Left-Hand Rotation
$29.99
PRE-ORDER
CMT 378.102.12 Dowel Drills for through holes with countersink 10 x 35 x 70 S=10 LHCMT 378.102.12 Dowel Drills for through holes with countersink 10 x 35 x 70 S=10 LH
CMT 378.102.12 Dowel Drills for through holes with countersink 10 x 35 x 70 S=10 LH
$33.50
LIMITED SUPPLY
CMT 317.150.12 Hinge Boring Bit, 15mm (19/32-Inch) Diameter, 10x26mm Shank, Left-Hand RotationCMT 317.150.12 Hinge Boring Bit, 15mm (19/32-Inch) Diameter, 10x26mm Shank, Left-Hand Rotation
CMT 317.150.12 Hinge Boring Bit, 15mm (19/32-Inch) Diameter, 10x26mm Shank, Left-Hand Rotation
$29.99
PRE-ORDER
CMT 317.190.11 Hinge Boring Bit, 19mm (3/4-Inch) Diameter, 10x26mm Shank, Right-Hand RotationCMT 317.190.11 Hinge Boring Bit, 19mm (3/4-Inch) Diameter, 10x26mm Shank, Right-Hand Rotation
CMT 317.190.11 Hinge Boring Bit, 19mm (3/4-Inch) Diameter, 10x26mm Shank, Right-Hand Rotation
$30.89

Recently viewed