Not all English wheels are the same. A 37 ¾” throat depth and box tubing frame make our EW-40 stand out from competing models. We include 9 bottom anvils and 3 upper wheels.
- 16 gauge mild steel capacity.
- 37 ¾” throat depth can handle almost any project.
- Comes with 3 upper wheels (6” x 2.75”).
9 hardened bottom anvils:
- ⅛”, ½”, and ¾” edge radii.
- 6” crown radius.
- 2 flat rolls.
- 5/16” x ¼” step roll.
- 1½ ” and ⅝” round bead rolls.
- You can roll beads as well as form metal on this English wheel.
- All upper wheels and lower anvils use sealed bearings.
- Swivel head lets you either push material directly into the throat or at a 90° to it.
- Quick-release cam allows you to release the panel without changing tension.
- Adjust the tension via the kick tensioner, made of real rubber.
- Fully welded 5” x 5” x .250” box tubing framework prevents flex when rolling at full capacity.
- Tooling holder on the side of the machine gives you a convenient place to put your rolls.
- Covered by a 1-year parts warranty.
- We offer lifetime technical support by phone from a team of service reps with hands-on machine experience.
Recommended for: Restoration or bodywork on autos, planes, cycles, and much more.
Item Number EW-40
Mild Steel Capacity 16 ga.
Throat Depth 37-3/4"
Aluminum Capacity 14 ga.
Lower Die Radius 1.85", 2.165", 4.85,40"
Shipping Weight 510lbs
Shipping Dimensions (Inches) 67x48x14
Top Wheel Dimensions 6” x 2 ¼”
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge of $100 to $200 dollars for the service. Sometimes it can be more or less. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
California Proposition 65
⚠WARNING: – www.P65Warnings.ca.gov.
We are providing this warning pursuant to a law passed by California in 1986 called the “California Safe Drinking Water and Toxic Enforcement Act of 1986”, or “Proposition 65” for short.
A Proposition 65 warning does not mean a product is in violation of any product-safety standards or requirements. In fact, the California government has clarified that “[t]he fact that a product bears a Proposition 65 warning does not mean by itself that the product is unsafe.”
The California agency tasked with implementing Proposition 65 has also explained, “You could think of Proposition 65 more as a ‘right to know’ law than a pure product safety law.” See http://oehha.ca.gov/prop65/background/p65plain.html
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.