The perfect combination of size and power, this precision lathe includes a Mitutoyo DRO, a collar stop system, and a heavy cast iron base to ensure accuracy.
- 12 speeds from 30 to 2,000 rpm.
- 7.5 hp motor runs on 220-volt 3-phase power.
- No assembly required.
- Factory-installed Mitutoyo DRO (digital readout) helps you make precise cuts.
- Precision ground and hardened ways will withstand years of use in any metalworking shop.
- ⅝” square indexing tool post.
- Collar system lets you set stops for repeat parts.
- This is a gap lathe, so you can remove a section of the slide to fit a slightly larger diameter.
- Full cast iron base, integrated into the mainframe, makes this one of the most rigid lathes on the market.
Comes standard with:
- 3-jaw chuck.
- Headstock chuck guard with automatic safety switch.
- Steady rest and follow rest.
- Emergency foot brake.
- Flood coolant system (with backsplash guard) to prolong machine life.
- Halogen work light.
- Covered by a 1-year parts warranty.
- Replacement parts are in stock at our Wisconsin headquarters for fast shipping.
- Lifetime technical support by phone means that you can call our team of experienced metalworkers whenever you have questions or need project advice.
Item Number PL-1640
Speed 30 – 2000 rpm
Spindle Bore 2.0625"
Threads Diametrical Qty Speed 32 / 4–32 D.P.
Threads Imperial Qty Speed 40 / 2–56 T.P.I.
Threads Metric Qty Speed 53 / .4–14 mm pitch
Threads Module Qty Speed 44 / .4–7 M.P.
Spindle Taper Sleeve Morse #4
Spindle Taper Nose Morse #6
Tailstock Quill Dia 2.125"
Tailstock Quill Taper Morse #4
Tailstock Quill Travel 4.75"
Compound Rest Width 4.33"
Center Height 7.086"
Compound Travel 4.75"
Bed Height 12.20"
Bed Length 17157
Bed Width 11.81"
Longitudinal Feeds Metric Qty Speed 40 / .032 – .640 mm / rev.
Main Motor 7.5 hp
Longitudinal Feeds Imperial Qty Speed 40 / .0012" – .0252" / rev.
Lead Screw Diameter 1.25"
Lead Screw Thread Pitch 4 T.P.I.
Max. Swing In Gap Length 6.125"
Max. Swing Over Bed 16"
Max. Swing Over Cross Slide 9.45"
Max. Swing In Gap Dia 23.42"
Cross Feeds Imperial Qty Speed 40 / .0006" – .0126" / rev.
Cross Feeds Metric Qty Speed 40 / .015 – .320 mm / rev.
Cross Slide Travel 9"
Cross Slide Width 7.08"
Cutting Tool Max Section .625" x .625"
Distance Between Centers 40"
Feed Rod .708 dia.
Power 220V / 3-phase
Shipping Weight 3940lbs
Shipping Dimensions (Inches) 90x37x81
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge of $100 to $200 dollars for the service. Sometimes it can be more or less. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
California Proposition 65
⚠WARNING: – www.P65Warnings.ca.gov.
We are providing this warning pursuant to a law passed by California in 1986 called the “California Safe Drinking Water and Toxic Enforcement Act of 1986”, or “Proposition 65” for short.
A Proposition 65 warning does not mean a product is in violation of any product-safety standards or requirements. In fact, the California government has clarified that “[t]he fact that a product bears a Proposition 65 warning does not mean by itself that the product is unsafe.”
The California agency tasked with implementing Proposition 65 has also explained, “You could think of Proposition 65 more as a ‘right to know’ law than a pure product safety law.” See http://oehha.ca.gov/prop65/background/p65plain.html
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.