The PTP-1110 plasma tube profiling machine is the economical choice in notching and profiling tube and pipe with plasma. This CNC pipe-cutting solution features a compact footprint of only 2-feet wide by 13-feet long and can rapidly finish 10-foot material. the PTP-1110 also improves pipe fabrication productivity and quality by utilizing easy set-up, programming and cutting.
The controller provides effective cutting on X-Y axis and the included software allows the operator to take the design-software-generated G code and take it directly to the controller. The movement of the axis are controlled by stepper motors, providing smooth carriage motion. A pneumatic chuck opens and closes the vice so that material can be easily loaded, positioned for cutting and unloaded.
The PTP-1110 pipe cutting machine uses a variable-angle, manual height control for plasma torches. It is capable of cutting and profiling pipe with an outside diameter range of 2" 11.5". The PTP-1110 is perfect for the shop that needs to quickly and efficiently make a wide range of cuts. These cuts include straight, miter, saddle, center offset, multiple intersection and gusset slots. The unit also cuts round, rectangular and overlapping pipe holes.
Item Number PTP-1110
Maximum Load Capacity 100lbs per foot
Table Size 9.84' (3 Meters)
Max. Piercing Capacity Depends on Plasma System
Notching Capacity (OD) 2" - 11.5" (50-300mm)
Included Accesories Included Accesories
Power Y Axis - .5hp , X Axis - 1hp
Shipping Weight 1700lbs
Special Notes Plasma System Sold Separately
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge of $100 to $200 dollars for the service. Sometimes it can be more or less. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
California Proposition 65
⚠WARNING: – www.P65Warnings.ca.gov.
We are providing this warning pursuant to a law passed by California in 1986 called the “California Safe Drinking Water and Toxic Enforcement Act of 1986”, or “Proposition 65” for short.
A Proposition 65 warning does not mean a product is in violation of any product-safety standards or requirements. In fact, the California government has clarified that “[t]he fact that a product bears a Proposition 65 warning does not mean by itself that the product is unsafe.”
The California agency tasked with implementing Proposition 65 has also explained, “You could think of Proposition 65 more as a ‘right to know’ law than a pure product safety law.” See http://oehha.ca.gov/prop65/background/p65plain.html
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.