WP-1800B Benchtop Welding Positioner
Ever wish you had a third or even fourth hand when trying to weld something? Or having to weld around a pipe only to have the cable wrapped around the project because instead of the material spinning you went around the material? If you answered yes, then you need a benchtop weld positioner like the WP-1800B from Baileigh Industrial.
The WP-1800B integrated chuck makes welding of round tubing, pipe, or solids, easy and effortless. The rotational chuck mounted on a steel plate that reduces vibrtationsand allows it to be placed on any bend and adjusted to the correct height to relieve stress and fatigue.
The chuck operates of 110 volts of power and is variable speed. Speed can be adjusted from 0 to 6 rpm with the use of the foot pedal or possibly be locked in at a set speed from the control panel. The WP-1800B is also a self contained welding positioner that can be taken to a job site with no external grounding necessary. Just put your ground clamp on the ground peg, plug in the machine to power source and turn it on. Variable speed AC motor with foot pedal control offers hands free operation while welding, grinding, or brazing.
Item Number WP-1800B
Country of Manufacture United States
Speed 0 – 6 rpm (Variable)
Thru Hole OD 2.25"
Chuck Capacity 1/4" OD/10-3/4" ID
Chuck Size Three Jaw 8"
Maximum Current 300 Amps
Drive Automatic / Manual
Shipping Weight 250lbs
Shipping Dimensions (Inches) 48x31x40
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge of $100 to $200 dollars for the service. Sometimes it can be more or less. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
California Proposition 65
⚠WARNING: – www.P65Warnings.ca.gov.
We are providing this warning pursuant to a law passed by California in 1986 called the “California Safe Drinking Water and Toxic Enforcement Act of 1986”, or “Proposition 65” for short.
A Proposition 65 warning does not mean a product is in violation of any product-safety standards or requirements. In fact, the California government has clarified that “[t]he fact that a product bears a Proposition 65 warning does not mean by itself that the product is unsafe.”
The California agency tasked with implementing Proposition 65 has also explained, “You could think of Proposition 65 more as a ‘right to know’ law than a pure product safety law.” See http://oehha.ca.gov/prop65/background/p65plain.html
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.