The Baileigh Industrial Atomized Cooling Fan helps you against heat and humidity, so your team can comfortably work. Powerful and portable, the BCF-3019 uses fluid atomizing technology to instantly evaporate microdroplets and lower air temperature. That means better, more efficient cooling, without a noticeable increase in humidity.
Since the BCF-3019 is able to be used indoors or outside, it is great for festivals, sporting events, barns, foundries, fabrication shops just to name a few. The possiblities are endless as to where it can be used.
Here are some other unique features that set this cooling fan apart:
- Cools up to 3000 sq. ft.
- 3 fan speeds
- Compact size with small footprint (2’ x 4’)
- Efficiently cools with minimal increase to air humidity
- Runs more than 10 hours on a full tank of water
- Does not require a permanent water source
- Automatic low water shut-off
- Operates on a standard 120 volt outlet
- Easy-to-use locking foot brake
- 12-inch solid rubber tires will never go flat
- Suitable for both indoor and outdoor use
- No break-in period – ready to use out of the box
- No lengthy shut-down procedure
- Does not require purchase of replacement pads
- Two on-board 120V GFCI accessory power outlets
- Proudly Made in the USA.
Item Number BCF-3019
Country of Manufacture United States
Drive Type Direct
Noise 77.5 db at 5 ft.
Motor Hp 1/2 hp
Blade Speeds 400/800/1100 RPM
Cooling System 6 Atomized Nozzles
Cooling Coverage (Sq. Ft.) 3,000
Air Flow (CFM) 8,462 (high speed)
Air Velocity (MPH) 22.3 (high speed)
Fan Diameter 30"
Tank Capacity 19 Gallons
Run Time 10 hours on full tank
Included Accesories Included Accesories
Shipping Weight 450 lbs
AMP Draw 10.3 A
Shipping Dimensions (Inches) 69x44x77
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge of $100 to $200 dollars for the service. Sometimes it can be more or less. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
California Proposition 65
⚠WARNING: – www.P65Warnings.ca.gov.
We are providing this warning pursuant to a law passed by California in 1986 called the “California Safe Drinking Water and Toxic Enforcement Act of 1986”, or “Proposition 65” for short.
A Proposition 65 warning does not mean a product is in violation of any product-safety standards or requirements. In fact, the California government has clarified that “[t]he fact that a product bears a Proposition 65 warning does not mean by itself that the product is unsafe.”
The California agency tasked with implementing Proposition 65 has also explained, “You could think of Proposition 65 more as a ‘right to know’ law than a pure product safety law.” See http://oehha.ca.gov/prop65/background/p65plain.html
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.