201HH, 22" Planer, 7.5HP 3PH 230V, Helical Cutterhead
This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 125 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements.
Type of Cutterhead HELICAL
Style (Type) Floor
Feed Rate (FPM) 20/30
Maximum Depth of Cut (In.) 3/16
Maximum Full Width Depth of Cut (In.) 3/16
Maximum Planing Width (In.) 22
Cutterhead Diameter (In.) 3-1/4
Maximum Planing Thickness (In.) 9-1/4
Cutterhead Speed (RPM) 4800
Minimum Planing Length (In.) 10
Number of Speeds 2
Infeed Roller Diameter (In.) 3
Motor Power (HP) 7-1/2
Bed Rollers Adjustable from Front 2
Maximum Height of Rollers Parallel to Tabletop (In.) 0.05
Column Diameter (In.) 2-1/2
Dust Collection Minimum CFM Required (CFM) 900
Motor Phase 3
Prewired Voltage (V.) 230
This item will be shipped to you directly from the manufacturer.
Processing and fulfillment times are subject to manufacturer availability. If there are any delays, you will be contacted by us with a more accurate delivery timeframe.
It is important to assess the product being shipped against your location and material-handling capabilities.
Please be aware that your location needs to be prepared to properly handle and sign for freight shipments. You need to have access to a dock location, a forklift or the ability to unload the product from the freight carrier's trailer.
If your location does not have a traditional loading dock or forklift to unload your LTL freight out of the trailer, a Lift gate service will be required. There will be an additional charge of $100 to $200 dollars for the service. Sometimes it can be more or less. It varies by carrier and even by market with different carriers. It often depends on the supply and demand of lift gate equipped trucks in your area.
If a shipment is too heavy or the footprint (i.e., panel saws, metalworking lathes, mill/drills) is too large to ship via small parcel carrier (USPS, UPS or FedEx), it is shipped via a freight carrier. Freight shipments are considered tail gate deliveries, meaning that the driver is only responsible for moving the shipment to the rear of the trailer and will not assist with unloading.
For non-commercial deliveries, the freight carrier will contact you to schedule a delivery window and confirm if lift gate services are required. If lift gate service is requested, the driver is responsible for lowering the product to the ground during delivery. Freight shipments delivered to a residential location are considered curb side deliveries, meaning the driver will make the delivery in the street at the end of the customer’s driveway. Freight Carriers are not required to enter driveways to make residential deliveries due to liability and safety issues.
Although most deliveries go smoothly, sometimes there are exceptions beyond our control. Machines weighing over 2,000 pounds, bulky and oversized machines with a large footprint may not be able to be delivered via a lift gate for risk of injury or damage to the machine. There are also inaccessible remote, residential or high density urban areas that freight carriers cannot safely access. If encountered, such shipments are available for dock delivery or will be required to be picked up from the carrier’s terminal.
If you have any questions about freight delivery options, contact us at info@FactoryDirectSupplyOnline.com
California Proposition 65
⚠WARNING: – www.P65Warnings.ca.gov.
We are providing this warning pursuant to a law passed by California in 1986 called the “California Safe Drinking Water and Toxic Enforcement Act of 1986”, or “Proposition 65” for short.
A Proposition 65 warning does not mean a product is in violation of any product-safety standards or requirements. In fact, the California government has clarified that “[t]he fact that a product bears a Proposition 65 warning does not mean by itself that the product is unsafe.”
The California agency tasked with implementing Proposition 65 has also explained, “You could think of Proposition 65 more as a ‘right to know’ law than a pure product safety law.” See http://oehha.ca.gov/prop65/background/p65plain.html
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.